Dispatched with your gang sheets12 noon cutoff for the whole order · need blanks sooner? Order them separately
Pay in 3 with PayPal3 × £26.78, interest-freePay in 3 with PayPalinterest-free on orders over £30
'Thank you' Sublimation Mug
'Thank you' 11oz Sublimation Mug.
These mugs come with the insides pre-printed with the message 'Thank you'.
Sold in boxes of 36
Suitable for both sublimation and UV DTF
*Please note that the Ceramic blanks must be at room temperature before printing.
Can be sublimated with the following:
Mug press
Oven (using either mug wrap or Thermoshrink Film)
Tunnel oven (using mug wrap or Thermoshrink Film)
Product Specifications
Individually boxed
Dishwasher safe
Suitable for the microwave but not for extended use or high temperatures
Pressing Instructions
Pressing Instructions: For Heat Press
180 SECONDS
180°C
MEDIUM
Pressing Instructions: For Convection Ovens
13 MINUTES
180°C
Suitable for UV DTF
Further information:
The above pressing information are guide lines only as all heat presses vary from different manufacturers.
Videos
Tips and Tricks
As with all ceramics be sure the mug is heated through to at least room temp before putting in the press.
As always with mugs be sure to leave a little gap at the top and bottom of the mug if using a mug press, if you are using an oven you can go for a full top-to-bottom wrap.
Video guide
How to sublimate an 11oz ceramic mug
Sublimating an 11oz Superglaze white mug in a Prima manual mug press: sizing and taping the printed transfer, closing the press, and peeling the paper. One tip from the video — let a cold mug come up to room temperature before it goes anywhere near the press.
Plays here from YouTube when you press play. Open on YouTube
