Ceramic Round Christmas Tree Ornaments

A flat round ornament for you to sublimate with your own personal designs to hang on a Christmas tree. These ceramic decorations can be sublimation printed using a swing away heat press or a 3D Vacuum press.

Product Code:

H003-Y-100

£75.00 100 Per Box = £0.75 each

Product Description

Ceramic Ornaments Instructions

A flat round ornament for you to sublimate with your own personal designs to hang on a Christmas tree.

Sold in boxes of 100.
Can be sublimated on both sides.
Comes supplied with gold thread.
Ceramic measurements: 7cm.
Suitable for Sublimation, UV printing and Vinyl Transfers.
These ceramic decorations can be sublimated using a Heat Press, 3D Vacuum Press or Oven.

These ceramic items may not be 100% flat as they are a manufactured product. To get great prints every time we suggest that you press these using a thin (1.5mm thick) silicone mat to create a flush surface. You will need to heat these ornaments 'face down' so that you are heating through the ceramic ornament and not heating the paper directly.

* Please note that the Ceramics must be at room temperature before printing.

Heat Press Instructions:

Please note that all recommended pressing parameters are guidelines only.

180 SECONDS

185°C

LIGHT

Vacuum Instructions:

Please note that all recommended pressing parameters are guidelines only.

270 SECONDS

195°C

VACUUM

Oven Instructions:

Please note that all recommended parameters are guidelines only.

180°C

Tips and Tricks

Being a thin ceramic we recommend using a smooth silicone pad on the bottom of your heat press and using some polyester fabric as a top cover layer as well as having your pressure on the lighter side.

As always with ceramics make sure it is heated through to at least room temp before going in the press.